Step 1: Take out the Datalogic QuickScan QBT21X1 Scanner, Cradle, USB Cord and Quick Reference Guide out of the box.
Step 2: Then, remove the cable stopper from the bottom of the cradle base.
Step 3: Then, plug in the one side of the RJ45 side of the cable into the correct insert on the cradle.
Step 4: Then, insert the cable stopper back underneath the cradle base.
Note: Optional power adapter is not included in the box.
Step 5: Then, plug in the other end of the USB cable to the computer.
Step 6: Next, Open the quick reference guide and turn to page 23.
Note: If manual is misplaced, check out the link below and the manual will come up for you to print. http://postorg.com.ua/published/file/110013/820072314.pdf
Step 7: Open the manual/set up sheet and scan the “STANDARD KEY ENCODING” Barcode under the Keyboard interface category (Page 23).
Step 8: Next, open up any word processing document and scan any barcode with the barcode scanner. The scanner should detect the barcode and automatically do a carriage return and look like the image below:
*Optional Test with AmberPOS*
Step 9: Now, open up AmberPOS and click on inventory, select the search box shown in the picture below.
Step 10: Lastly, scan one of your own inventory items that you have in AmberPOS and it will be selected in Amber like so in the picture below.