Setting Up the OHAUS Weigh Scale for AmberPOS

Model: OHAUS: Gold Series

gold_series_ohaus.JPG

 

 

1, To Setup your Weigh Scale for AmberPOS, first place it near the computer that is running the POS software.

cables_for_ohaus.JPG

      Step 1. Plugin the respective end of the power cable to the scale and the other end to an AC socket.

      Step 2. **Note** Serial cable can only be purchased separately  Plugin the respective end of the serial port cable to the scale, and the other end to your computer. (Usually requires adapter for serial-to-usb).

 

2. Login to AmberPOS, then access the Setup Menu.

 

3. Select the Printers and Local Settings tab.

 

4. Overview of Weigh Scale Menu in AmberPOS located in the top right corner.

ohaus_scale_selected.JPG

      Step 1. The Com Port: section is where you select which com port the USB-Serial adapter from the scale is plugged into your computer.

Comport varies, to find your com port: First plugin the scale into a USB port via usb-serial converter, or serial port via serial-serial cable, then right click my computer ---> Manage ---> Device Manager  ---> Ports (COM & LPT) ---> USB Serial Port (COM#)

com_ports.JPG

      Step 2. The Scale Type: section is where you select the type of scale being used (in this case OHAUS)

      Step 3. The Weight type: section specifies the unit type of measurement the scale will be using.

Select Save, to save the settings changed. Then restart AmberPOS.

 

5. Weight can ONLY be applied to a SKU that has Partial Qty enabled and a Unit Type selected. To access these settings, enter the Inventory screen and select the SKU to change the settings for.

unitype_and_partial_quantity.JPG

 

**Note** The lock on the bottom of the scale is for sealing access lock. (a bracket will be displayed on the final digit of your weight value on the scale if the bracket is closed as shown in the image below)

bracket.JPG

 

 

**Information of sealing lock from manual**

 

sealing_access.JPG

 

**Location of sealing lock**

bottom_of_ohaus_scale.JPG

 

 

6. Enter the POS screen, ensure all the cables for the scale are correctly plugged in, place the SKU with the settings in step 5 on the scale, then make a sale for the SKU. If the scale is properly functioning it should show the weight of the object on the scale in POS as shown in the image below. (Example shows 0.115 grams converted into a quantity of 0.115)

demo_weight_scale_image_pos_screen.JPG

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk